|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Advanced Power Electronics Corp. APE1117A GENERAL DESCRIPTION APE1117A is a low dropout positive adjustable or fixed-mode regulator with minimum of 1A output current capability.The regulator is able to operate with output Capacitors as small as 1uF Ceramic Capacitor for stability.The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.3V logic supply. APE1117A is also well suited for other applications such as VGA cards. APE1117A is guaranteed to have lower than 1.4V dropout at full load current making it ideal to provide well-regulated outputs of 1.25 to 5.0 with 6.4V to 12V input supply. 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator FEATURES - 1.4V maximum dropout at full load current - Fast transient response - Output current limiting - Built-in thermal shutdown - Needs Only 1uF Capacitor for stability - Good noise rejection - 3-Terminal Adjustable or Fixed 1.5V, 1.8V, 1.9V, 2.5V, 3.3V, 5.0V - Low ESR Ceramic Capacitor for output stability - Packages: SOT-223, TO-252, SOT-89, - RoHS Compliant APPLICATIONS - PC peripheral - Communication - LCD Modules ORDERING INFORMATION APE1117A X -XX Low Dropout Regulator Package K : SOT-223-3L Blank : ADJ 15 : 1.5V H : TO-252-3L 18 : 1.8V G : SOT-89-3L 19 : 1.9V 25 : 2.5V 33 : 3.3V 50 : 5.0V Vout TYPICAL CIRCUIT 5V 5V C1 1uF Vin Vout GND Tab is Vout C2 1uF 3.3V/1A Vin Vout Adj Tab is Vout R1 121 R2 121 Vo 2.5V/1A C1 1uF C2 1uF ( 5V/3.3V fixed output ) ( 5V/2.5V ADJ output ) Note: Vo = VREF (1+ R2 ) R1 This datasheet contains new product information. Advanced Power Electronics Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product. 1 200804176 Advanced Power Electronics Corp. APE1117A CONNECTION DIAGRAM 3 PIN SOT-223 ( Top View ) 3 2 1 3 PIN TO-252 ( Top View ) Vin Vout Adj (GND) 3 2 1 Tab is Vout Vin Vout Adj (GND) Tab is Vout 3 PIN SOT-89 3 2 1 Tab is Vout Vin Vout Adj (GND) BLOCK DIAGRAM Vin 3 2 Vout + + CURRENT LIMIT 1.25V + 1 + Thermal Shutdown GND (FIXED) 1 Adj Advanced Power Electronics Corp. www.a-power.com.tw 2 Advanced Power Electronics Corp. APE1117A PIN DESCRIPTIONS NAME I/O PIN # FUNCTION Adj (GND) I 1 A resistor divider from this pin to the Vout pin and ground sets the output voltage. (Ground only for Fixed-Mode) The output of the regulator. A minimum of 1uF capacitor must be connected from this pin to ground to insure stability. The input pin of regulator. A minimum of 1uF capacitor is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response. This pin must always be 1.4V higher than Vout in order for the device to regulate properly. Vout O 2 Vin I 3 ABSOLUTE MAXIMUM RATINGS Symbol Parameter Rating Unit Vin PD TST TOP DC Supply Voltage Power Dissipation SOT-223 SOT-89 TO-252 -0.3 to 16 850 330 1050 -65 to +150 0 to +150 V mW oC oC Storage Temperature Operating Junction Temperature Range Advanced Power Electronics Corp. www.a-power.com.tw 3 Advanced Power Electronics Corp. APE1117A ELECTRICAL CHARACTERISTICS (Under Operating Conditions) PARAMETER Reference Voltage APE1117A-ADJ APE1117A-1.5 APE1117A-1.8 APE1117A-1.9 Output Voltage APE1117A-2.5 APE1117A-3.3 APE1117A-5.0 Line Regulation APE1117A-XXX APE1117A-ADJ APE1117A-1.5 APE1117A-1.8 Load Regulation APE1117A-1.9 APE1117A-2.5 APE1117A-3.3 APE1117A-5.0 Dropout Voltage (VIN-VOUT) CONDITIONS o TJ=25 C,(VIN-OUT)=1.5V IO=10mA o IOUT = 10mA, TJ = 25 C, 3VO VINO 12V o IOUT = 10mA, TJ = 25 C, 3.3VO VINO 12V o IOUT = 10mA, TJ = 25 C, 3.3VO VINO 12V o IOUT = 10mA, TJ = 25 C, 4VO VINO 12V o IOUT = 10mA, TJ = 25 C, 4.8VO VINO 12V o IOUT = 10mA, TJ = 25 C, 6.5VO VINO 12V TJ=25oC VIN=3.3V,Vadj=0,0mA TYP 1.250 1.500 1.800 1.900 2.500 3.300 5.000 MAX 1.275 1.530 1.836 1.938 2.550 3.365 5.100 0.5 1 UNIT V V V V V V V % % mV mV mV mV mV mV V A 12 15 16 20 26 40 1.3 1. 1 1 0.008 60 0.5 150 130 300 117 92 100 15 10 15 18 19 25 33 50 1.5 APE1117A-ADJ/1.5/1.8 IOUT = 1A ,VOUT=1%VOUT /1.9/2.5/3.3/5.0 APE1117A-ADJ/1.5/1.8 Current Limit (VIN-VOUT) = 5V /1.9/2.5/3.3/5.0 o o C 0 COTjO125 Minimum Load Current APE1117A-XXX o Thermal Regulation TA=25 C, 30ms pulse F=120Hz,COUT=25uF Tantalum, IOUT=1A Ripple Rejection APE1117A-XXX VIN=VOUT+3V Temperature Stability =10mA IO Thermal Shutdown Temperature Thermal Shutdown Temperature Recovery JA Thermal Resistance SOT-89 SOT-223 Junction-to-Ambient(No TO-252 heat sink ;No air flow) SOT-89 : Control Circuitry/Power Transistor JC Thermal Resistance SOT-223 : Control Circuitry/Power Transistor TO-252 : Control Circuitry/Power Transistor Junction-to-Case 3 0.04 70 mA %/W dB % o C o C O C/W O C/W Note1: See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation are measured at a constant junction temperature by low duty cycle pulse testing. Load regulation is measured at the output lead = 1/18" from the package. Note2: Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is determined by the difference between input and output differential and the output current. Guaranteed maximum power dissipation will not be available over the full input/output range. Note3: Quiescent current is defined as the minimum output current required in maintaining regulation. At 12V input/output differential the device is guaranteed to regulate if the output current is greater than 10mA. Advanced Power Electronics Corp. www.a-power.com.tw 4 Advanced Power Electronics Corp. APE1117A TYPICAL PERFORMANCE CHARACTERISTICS 2. 0 1. 8 0.20 Output Voltage Deviation (%) 1. 6 0 I load=800mA Dropout Voltage (V) 1. 4 1. 2 1. 0 0. 8 0. 6 0. 4 0. 2 0 0 Tj = 125 oC Tj = 25 oC -0.20 -0.40 -0.80 Dropout Voltage vs Output Current 2 1.5 1 Output Current (mA) 250 500 750 1000 -1 -25 0 Temperature (oC) 25 50 75 100 125 Load Regulation vs Temperature Output Voltage Change (%) 1 0. 5 0 -0.5 -1 -1.5 -2 -50 -25 0 25 50 75 100 125 150 0.8 Output Voltage Deviation (%) 0.6 0.4 0.2 0 Percent Change in Output Voltage vs Temperature Output Voltage Deviation (mV) Input Voltage (V) Load Current (A) Output Voltage Deviation (mV) 7.5 6.5 5.5 40 20 0 -20 -40 Cin=1uF Cout=10uF Tantalum 30 20 10 0 -10 -20 2 1 0 -1 0 10 20 Temperature (oC) 2 4 Line Regulation C in = 1uF C out = 10 uF Tantalum Preload = 100mA Input Voltage (V) 6 8 10 12 0 20 40 60 TIME (us) 80 100 120 140 160 180 200 30 TIME (us) 40 50 60 70 80 90 100 Line Transient Response Load Transient Response Advanced Power Electronics Corp. www.a-power.com.tw 5 Advanced Power Electronics Corp. APE1117A MARKING INFORMATION (1) SOT-223-3L (2) TO-252-3L (Top view) (Top view) Output Type: 1117A: Adjustable 117A-15: 1.5V 117A-18: 1.8V 117A-19: 1.9V 117A-25: 2.5V 117A-33: 3.3V 117A-50: 5.0V 117A- 33 Logo Output Type: 1 1 1 7A 1117A: Adjustable X XX XXX 117A-15: 1.5V 117A-18: 1.8V 117A-19: 1.9V 117A-25: 2.5V 117A-33: 3.3V Year: 117A-50: 5.0V "1" = 2001 X XX XXX Sequence: 001~ Xth Week: 01~52 Sequence: 001~ Xth Week: 01~52 "1" = 2001 Year: "2" = 2002 ~ "2" = 2002 (3) SOT-89-3L Date Code Year: 1 =2001 2 =2002 Xth week: 01~52 Sequence: 0~9, A~ Identification code Output version APE1117A-ADJ APE1117A-1.5V APE1117A-1.8V APE1117A-1.9V APE1117A-2.5V APE1117A-3.3V APE1117A-5.0V XXXX X XX X 1 2 3 Identification Code ( See the table ) 17AA 17AB 17AC 17AG 17AD 17AE 17AF Advanced Power Electronics Corp. www.a-power.com.tw 6 ADVANCED POWER ELECTRONICS CORP. Package Outline : TO-252 D D1 SYMBOLS Millimeters MIN NOM MAX A2 A3 B1 D D1 E3 1.80 0.40 0.40 6.00 4.80 3.50 2.20 0.5 5.10 0.50 -0.35 2.30 0.50 0.70 6.50 5.35 4.00 2.63 0.85 5.70 1.10 2.30 0.50 2.80 0.60 1.00 7.00 5.90 4.50 3.05 1.20 6.30 1.80 -0.65 E2 E3 E1 F F1 E1 E2 e C B1 F1 F 1.All Dimensions Are in Millimeters. 2.Dimension Does Not Include Mold Protrusions. e e A2 R : 0.127~0.381 A3 (0.1mm C Part Marking Information & Packing : TO-252 Part Number XXXXX ADJ : 1117A 1.5V : 117A-15 1.8V : 117A-18 LOGO YWWSSS 5.0V : 117A-50 Date Code (YWWSSS) YLast Digit Of The Year WWWeek SSSSequence 7 ADVANCED POWER ELECTRONICS CORP. Package Outline : SOT-223 C Millimeters SYMBOLS MIN NOM MAX A B C A D G E F K 6.70 --2.90 0.60 0.25 6.30 1.40 0.02 7.00 2.3 3.00 0.70 0.30 6.50 1.60 0.06 7.30 --3.10 0.80 0.35 6.70 1.80 0.10 B D E F K G 1.All Dimension Are In Millimeters. 2.Dimension Does Not Include Mold Protrusions. Part Marking Information & Packing : SOT-223 Part Number XXXXX YWWSSS ADJ : 1117A 1.5V : 117A-15 1.8V : 117A-18 5.0V : 117A-50 Date Code (YWWSSS) YLast Digit Of The Year WWWeek SSSSequence 8 ADVANCED POWER ELECTRONICS CORP. Package Outline & Packing : SOT-89 C J SYMBOLS Millimeters MIN NOM MAX A B B 1 2 3 F I H G K D E C E F I H G J K 4.40 4.05 1.40 2.40 0.89 0.35 ------1.40 0.35 1.50 3.00 - 4.60 4.25 1.75 2.60 1.20 0.55 ------1.60 0.43 1.All Dimensions Are in Millimeters. A 2.Dimension Does Not Include Mold Protrusions. Part Marking Information : SOT-89 Part Number 17XX XXXG YWWS Output Voltage Date Code (YWWS) Y:Year WWWeek SSequence 9 |
Price & Availability of APE1117AK-15 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |